For sale Euphonic Audio Iamp Doubler in perfect condition.
This is one of the nicest quality micro bass amps ever made. It's built specifically for a bass player who doubles on electric and double bass, but can obviously be used by either as a main amp.
Also works great when using two electric basses on a gig. I.e. Fretless/Fretted, 4/5 string etc. known for being very transparent sounding.
THE SPECS:
• Inputs: Configuration: 2 independent channels, Channel 1 Mid EQ set at 500Hz for electric bass, Channel 2 Mid EQ set at 800Hz for upright/acoustic bass- Channel 2 has XLR input with phantom power
• Input Impedance: 1Meg ohm input impedance on both inputs
• Trim controls: Independent channel level adjustments, DI output level, and high pass filter
• Intelligent Input Switching: Select different settings for 1 bass or have independent setups for 2 basses, Channel 1 or Channel 2, or Channel 1+2
• Controls: Channel switch, Input gain, 3-Band EQ, Master Volume, Mute switch, Effects loop blend
• EQ: Low, Mid, and High for each channel, Variable high pass filter 22-80 Hz, 6db per octave (allows selection of a frequency below which response is reduced, helps boomy rooms and stages (Channel 2 only) – Channel 2 also includes switchable Phantom Power, Variable Phase Control, and switchable Variable Notch Filter
• Effects Loop: Parallel effects loop with blend control, wide range of setups via internal jumpers
• Outputs: Speakon speaker, tuner, effects send, balanced DI out (1/4″ stereo wired as TRS)
• Protection: Internal cooling fan, thermal and overload
• Line Voltage: 100/120 – 240 volts internally selected via jumper
• Frequency Response: 20Hz to 20kHz +/- 3dB
• Power Output: 550 watts @ 4 ohms 310 watts @ 8 ohms
• Size: 2.1″H x 10.5″W x 5.4″D
• Weight: 2.6 lbs.
This is one of the nicest quality micro bass amps ever made. It's built specifically for a bass player who doubles on electric and double bass, but can obviously be used by either as a main amp.
Also works great when using two electric basses on a gig. I.e. Fretless/Fretted, 4/5 string etc. known for being very transparent sounding.
THE SPECS:
• Inputs: Configuration: 2 independent channels, Channel 1 Mid EQ set at 500Hz for electric bass, Channel 2 Mid EQ set at 800Hz for upright/acoustic bass- Channel 2 has XLR input with phantom power
• Input Impedance: 1Meg ohm input impedance on both inputs
• Trim controls: Independent channel level adjustments, DI output level, and high pass filter
• Intelligent Input Switching: Select different settings for 1 bass or have independent setups for 2 basses, Channel 1 or Channel 2, or Channel 1+2
• Controls: Channel switch, Input gain, 3-Band EQ, Master Volume, Mute switch, Effects loop blend
• EQ: Low, Mid, and High for each channel, Variable high pass filter 22-80 Hz, 6db per octave (allows selection of a frequency below which response is reduced, helps boomy rooms and stages (Channel 2 only) – Channel 2 also includes switchable Phantom Power, Variable Phase Control, and switchable Variable Notch Filter
• Effects Loop: Parallel effects loop with blend control, wide range of setups via internal jumpers
• Outputs: Speakon speaker, tuner, effects send, balanced DI out (1/4″ stereo wired as TRS)
• Protection: Internal cooling fan, thermal and overload
• Line Voltage: 100/120 – 240 volts internally selected via jumper
• Frequency Response: 20Hz to 20kHz +/- 3dB
• Power Output: 550 watts @ 4 ohms 310 watts @ 8 ohms
• Size: 2.1″H x 10.5″W x 5.4″D
• Weight: 2.6 lbs.
