Hilfe bei Ohm Berechnung

musicman5

musicman5

Well-Known Member
Beiträge
1.130
Ort
DE
Bassix
ß89.704
Sorry für meine Unwissenheit. Ich kann mir vorstellen, dass diese Frage hier sicherlich schon irgendwo beantwortet ist. Vielleicht kann ja mal schnell einer helfen.
Eine 6 und eine 8 ohm Box am Topteil angeschlossen. Welche Last liegt dann am Verstärker an.
Viele Grüße
 
Spontan chatgpt gefragt weil ich faul bin:
When you wire two resistors in parallel, you can calculate the total resistance using the following formula:

1 / R_total = 1 / R1 + 1 / R2

Where R_total is the total resistance, R1 is the resistance of the first resistor, and R2 is the resistance of the second resistor.

In your case, you have a 6-ohm resistor (R1) and an 8-ohm resistor (R2) wired in parallel, so you can plug these values into the formula:

1 / R_total = 1 / 6 ohms + 1 / 8 ohms

Now, let's calculate it step by step:

1 / R_total = (1 / 6) + (1 / 8 )

To add these fractions, you need a common denominator, which is 24. So, you can rewrite the fractions with the common denominator:

1 / R_total = (4/24) + (3/24)

Now, add the fractions:

1 / R_total = (4/24 + 3/24) = 7/24

Now, take the reciprocal of both sides to find R_total:

R_total = 24 / 7 ohms

So, when you wire a 6-ohm and an 8-ohm resistor in parallel, the total resistance is approximately 3.43 ohms.
 
Lieben Dank.
Möchte also an meinen Mark Bass Amp eine 6 und eine 8 Ohm direkt an den Speakerausgängen anschließen.
3,43 Ohm. Hat der Amp damit ein Problem??
 
Parallel 3,428 Ohm, seriell 14 Ohm
Wir gehen jetzt mal nicht auf die Dispersion der Impedanz ein...;-)
Lieben Dank.
Möchte also an meinen Mark Bass Amp eine 6 und eine 8 Ohm direkt an den Speakerausgängen anschließen.
3,43 Ohm. Hat der Amp damit ein Problem??
Markbass sagt, dass die Mindestlast für alle Topteile bei 4 Ohm liegt. Ich würde erstmal denken, dass das eigentlich kein Problem sein sollte... und und vor allem dann, wenn das Teil nicht dauernd unter Volllast läuft...
 
Eine Impedanz von 3.43 statt 4 Ohm sollte keinen Amp schädigen.

Edit: Der für 4 Ohm spezifiziert ist. Bei reinen 8 Ohm Amps mag das anders sein, die sind aber sehr selten, z. B. Fender Studio Bass (Röhre) oder viele in Brücke geschaltete PA-Endstufen.
 
Zuletzt bearbeitet:


Zurück
Oben Unten